Diodes AP2815 Bedienungsanleitung PDF herunterladen

Advance Datasheet

1.5A High-side Power Distribution Switch with Enable and Flag AP2815

Apr. 2012 Rev 1. 7 BCD Semiconductor Manufacturing Limited

General Description

The AP2815 is an integrated high-side power switch

that consists of N-Channel MOSFET, charge pump,

over current & temperature and other related protection

circuits. The switch’s low R

DS(ON)

, 60mΩ, is designed

to meet the USB voltage drop requirements. The IC

integrates soft-start to limit inrush current,

over-current protection, load short protection with

fold-back, and thermal shutdown to avoid switch

failure during hot plug-in. Under voltage lockout

(UVLO) function is used to ensure the device

remains off unless there is a valid input voltage

present. A FLAG output is available to indicate fault

conditions to the local USB controller.

The AP2815 is available in standard packages of

SOIC-8 and MSOP-8.

Features

•

Low MOSFET on Resistance: 60mΩ @

=5.0V

•

Compliant to USB Specifications

• Operating Voltage Range: 2.7V to 5.5V

• Low Supply Current: 65µA (Typ.)

• Low Shutdown Current: 1.0µA (Max)

• Guarantee 1.5A Continuous Load

• Current Limit: 1.65A (Min), 2.8A (Max)

• Under-voltage Lockout

• Logic Level Enable Pin:

eAvailable in Active-high or Active-low Version

• Soft Start-up

• Over-current Protection

• Over Temperature Protection

• Load Short Protection with Fold-back

• No Reverse Current when Power Off

• Deglitched FLAG Output with Open Drain

• eWith Output Shutdown Pull-low Resistor for

eA/C Versions

• UL Approved (File No. E339337)

•

Nemko CB Scheme IEC60950-1, Ref. Certif

No. NO64001

Applications

• USB Power Management

•

USB Bus/Self Powered Hubs

• Hot-plug Power Supplies

• Battery-Charger circuits

• Notebook, Motherboard PCs

Figure 1. Package Types of AP2815

SOIC-8 MSOP-8

1 2 3 4 5 6 ... 15 16