Diodes AH477A Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Diodes AH477A herunter. Diodes AH477A User Manual [en] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 10
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
SINGLE PHASE HALL EFFECT LATCH AH477A
1
Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing Limited
Data Sheet
General Description
The AH477A is an integrated Hall sensor with H-
bridged output driver designed for brushless DC motor
applications. The device includes an on-chip Hall sen-
sor for magnetic sensing, an amplifier that amplifies
the Hall voltage, a comparator to provide switching
hysteresis for noise rejection, a bi-directional drivers
for sinking and driving large current load. It also
includes an internal bandgap regulator to provide tem-
perature compensated bias for internal circuits and
allows a wide operating supply voltage range.
Placing the device in a variable magnetic field, if the
magnetic flux density is larger than threshold B
OP
, the
DO is turned to sink and DOB is turned to drive. This
output state is held until the magnetic flux density
reverses and falls below B
RP,
then causes DO to be
turned to drive and DOB turned to sink.
The AH477A is available in TO-94 (SIP-4L) package.
Features
· On-Chip Hall Sensor
· Operating Voltage: 3.5V to 18V
· H-Bridge Output Drivers for Single Coil
· Internal Bandgap Regulator for Temperature
Compensation
· Low Output Switching Current Noise
· Operating Temperature: -20
o
C to 85
o
C
· Low Profile TO-94 (SIP-4L) Package
· ESD Rating: 6000V (Human Body Model)
· Suitable for PWM Power Supply Control Speed
Applications
· Single-coil Brushless DC Motor
· Single-coil Brushless DC Fan
Figure 1. Package Type of AH477A
TO-94
Seitenansicht 0
1 2 3 4 5 6 7 8 9 10

Inhaltsverzeichnis

Seite 1 - Applications

SINGLE PHASE HALL EFFECT LATCH AH477A 1Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing

Seite 2 - Pin Description

IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the

Seite 3 - Ordering Information

SINGLE PHASE HALL EFFECT LATCH AH477A 2Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing

Seite 4

SINGLE PHASE HALL EFFECT LATCH AH477A 3Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing

Seite 5 - Electrical Characteristics

SINGLE PHASE HALL EFFECT LATCH AH477A 4Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing

Seite 6

5Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing LimitedSINGLE PHASE HALL EFFECT LATCH

Seite 7 - (Continued)

SINGLE PHASE HALL EFFECT LATCH AH477A 6Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing

Seite 8 - vs. Ambient Temperature

7Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing LimitedSINGLE PHASE HALL EFFECT LATCH

Seite 9 - Unit: mm(inch)TO-94

SINGLE PHASE HALL EFFECT LATCH AH477A 8Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing

Seite 10

9Oct. 2009 Rev. 1. 2 BCD Semiconductor Manufacturing LimitedSINGLE PHASE HALL EFFECT LATCH

Kommentare zu diesen Handbüchern

Keine Kommentare